spray nozzle
英 [spreɪ ˈnɒzl]
美 [spreɪ ˈnɑːzl]
网络 喷嘴; 喷雾喷嘴; 溅水喷嘴; 喷头; 喷水嘴
双语例句
- Design and Hydro-test Procedure of Hydro-test Device for Spray Nozzle Connector of Double-housing Steam Turbine
双缸汽轮机喷嘴组连接器的试压工装设计及工艺简介 - High-pressure water descaling spray nozzle is the crucial element of descaling equipment.
高压水除鳞喷嘴是除鳞设备的关键零件。 - High Pressure Jet Grouting Pile Applied to Staggered Pipeline Passing through Retaining Structure of Deep Foundation Considerations in the Deign of Spray Nozzle and Pipe Network of Automatic Sprinkler System
大半径高压摆喷桩在管线跨越基坑围护中的应用自动喷水灭火系统喷头和管网的设计与思考 - The results found that the pressure of the spray nozzle determined the diameter of resin droplets, and higher pressure resulted in resin droplets with smaller diameter.
喷嘴气压对胶液的雾化及胶滴直径有直接影响，在设定的气压范围内，压力越高，雾化效果越好，胶滴直径越小； - This fountain is provided with diving pump, spray nozzle, cover board, water tank, transparent casing, seep hole and water type converter;
一种喷泉，具有潜水泵、喷嘴、盖板、水槽和透明外罩、渗水孔、水型变换器； - The utility model installs the spray nozzle, which is capable of adjusting the concentration of the material inside the tank body and in favor of outflowing of the material.
本实用新型增加喷咀可以对罐体内的物料浓度进行调节，同时利于物料的流出。 - Spray nozzle can be shut down when it is not in need for spraying and cleaning.
无须喷气清洁时可完全关闭喷气口节省能耗； - Considerations in the Deign of Spray Nozzle and Pipe Network of Automatic Sprinkler System FAS ( Fire-fighting Automation System), includes automatic fire alarm system and sprinkler system.
自动喷水灭火系统喷头和管网的设计与思考FAS消防自动化系统，自动火灾报警、动喷淋系统。 - With smaller atomizing air flow rate compared to that of other nozzles, this spray nozzle is particularly suitable to being fixed on furnaces used in marginal oil fields.
与其它气动雾化喷嘴相比，这种喷嘴需要的雾化气量小，尤其适用于边际油田或无配套蒸汽锅炉的原油加热炉燃烧器。 - Therefore, the structure of a coaxial spray nozzle with two outlets is formed.
构成同轴双出口的喷嘴结构。 - Cleaning spray nozzle without moving the workpiece positioning table supporting the level of rotation so as to achieve a thorough cleansing purposes.
清洗时喷淋嘴不动，承托工件的工件台水平转动从而达到全面清洗的目的。 - Design of Distribution Bench for Precision Measuring Spray Nozzle Integrative Performance and on Fan Spray Nozzle; Experimental Research on Precision Measurement of PCB Based on Image Recognition
喷头综合性能精密测试试验台的研制及扇形雾喷头性能研究基于图像识别的印制电路板精密检测实验研究 - In Roadheader spray system and three screw type spray nozzle design and application
掘进机内喷雾系统及三层螺旋式喷嘴的设计与应用 - Shape selection and dimension optimization of direct jet high pressure spray nozzle were done.
对直射式雾化喷嘴进行选型及内部尺寸寻优。 - The Design and Research on Water Spray Nozzle for Forest Fire-extinguishing
用于森林消防的水雾灭火雾化喷头的设计与研究 - It can change adhesive's placement via change spray nozzle, such as dot type, single line, multi-line type, spiral type.
通过喷嘴的更换可实现、点状、条状、多条状、螺旋状等不同类型施胶的应用。 - The measurement relationship of the multi spray nozzle mixer is optimized by computer simulation and its effectiveness is proved.
并建立合理的数学模型，通过计算机仿真优化设计了多喷嘴混合器的尺寸配合关系，证明这种结构混合器的有效性。 - Fitting the relations of spray nozzle pressure and discharge coefficient and analysis the grain-size distribution.
对喷嘴中的压力关系和流量系数进行了拟合，分析了粒径分布，并且对该系统所用的气体介质&二氧化碳的溶解规律进行了测量和分析。 - The effect of spray direction depends on air process, spray nozzle type and air mass velocity;
喷水方向的优劣与空气处理过程、喷嘴形式和空气质量流速有关； - This paper describes the design method of full automatic integrated oil burner with centrifuge mechanical spray nozzle.
本文论述了利用离心式机械雾化喷嘴构成集成式全自动段式燃油锅炉燃烧器的设计方法。 - Experimental studies on the diameter of spray nozzle of the pre-chamber have been optimized.
在此基础上，对预燃室喷嘴直径进行了优化试验研究。 - The optimization to the spray nozzle organization and the atomization characteristic has the extremely vital significance.
因此对喷嘴的机构及雾化特性进行优化，具有非常重要的意义。 - Cold model experiment of spray nozzle distributor was conducted with water as medium.
以水为物系，对喷射式分布器进行了冷模试验。 - As a example, the temperature distribution in a empty furnace with a single spray nozzle has been given.
作为例子，作者计算了空炉状态下上部单烧嘴均热炉内温度场的分布。 - Comprehensive performance test system of spray nozzle was developed according to the various influence factors of spray quality.
雾化喷头综合性能测试试验系统就是围绕影响喷雾质量的各因素设计开发的。 - When talking about the optimization of ejector pump, it has studied the spray nozzle, throat and diffusion bell and other key components, analyzed the diameter and length of the components.
关于射流泵的优化方面，对组成射流泵的喷嘴、喉管和扩散管等关键部件进行了研究，分析了各部件的直径、长度等。 - First, the boundary conditions of volute and spray nozzle structures are always simplified; second, the flow and loss of turbine impellers is analyzed and studied.
对涡轮性能进行计算研究时，将蜗壳和喷嘴等结构的边界条件进行简化处理，对叶轮内部流动及损失进行了分析研究。 - According to the working principle of the circulatory system, we design a experimental device which be able to test the atomization performance of nozzle, and we test the droplet quality of spray nozzle by using the laser particle size analyzer. 4.
根据循环系统的工作原理，设计了一套测试循环系统中雾化喷嘴性能的实验装置，对雾化喷嘴进行实验研究，并利用激光粒度分析仪测试了雾化喷嘴的喷雾质量。 - Modeling and simulation by optimizing the internal structure of the nozzle to study high-pressure air nozzle parameters on the spray nozzle of the impact and changes of the fluid.
通过模拟和仿真，优化了喷嘴内部结构，研究了高压空气喷嘴参数对喷射的影响和喷管内流体的变化规律。